Aadyaan Infrastructure Pvt. Ltd.
Construction and structural steel fabrication contractor serving Navi Mumbai, Mumbai

Steel fabrication in Navi Mumbai rarely means one thing. On the eastern side of Thane–Belapur Road it usually means an industrial plot-holder who needs a shed, a crane bay or a mezzanine by a fixed date. In the CIDCO-planned residential and commercial nodes it means a developer who needs RCC frames, staircases and canopies delivered in step with a tower programme. Aadyaan Infrastructure Pvt. Ltd. serves both from its workshop in Ghatkopar (East), and this page explains how that works in practice: what the area is like for construction, what to plan for, and how to brief us.

Steel fabrication in Navi Mumbai: planned nodes and three layers of authority

Navi Mumbai was planned and developed by the City and Industrial Development Corporation of Maharashtra (CIDCO) as a set of nodes. The Navi Mumbai Municipal Corporation (NMMC) was constituted in December 1991 and looks after seven of those nodes, from Airoli in the north to Belapur in the south. CIDCO retains planning rights over open plots in those nodes. Other parts of the wider Navi Mumbai region, such as Taloja, sit under a different civic body, the Panvel Municipal Corporation.

On top of this, industrial estates are developed and administered by the Maharashtra Industrial Development Corporation (MIDC). The practical result is that a Navi Mumbai plot can have a landowner, a planning authority and a fire authority that are three different bodies. Before any design starts, the first question for every plot is simply: whose land is it, and whose approval process applies?

Nodes you will hear about

For a contractor, the node names are shorthand for a type of site. Turbhe, Mahape and Rabale are associated with the industrial belt. Vashi, Nerul and CBD Belapur are established residential and commercial nodes. Airoli and Ghansoli sit at the northern end near Thane. Taloja lies further south-east, and Ulwe is the node closest to the new airport. Each has its own access roads, plot sizes and neighbours, so a site visit matters more than a map.

The industrial belt: TTC, Thane–Belapur Road and Taloja

The TTC industrial area takes its name from Trans Thane Creek. It is the MIDC industrial zone between Thane and Navi Mumbai, also called the Thane–Belapur industrial belt. The spine is Thane–Belapur Road, a road of roughly 15 km that has been widened to six lanes and is concreted except for a short stretch near Digha. It passes Turbhe, Kopar Khairane, Mahape, Ghansoli, Rabale and Airoli, runs alongside the Trans-Harbour railway line between Turbhe and Digha, and ends at Kalwa in Thane.

Taloja has its own MIDC industrial area and should be treated as a separate market from the TTC belt. It is farther from Ghatkopar, it falls under the Panvel Municipal Corporation rather than NMMC, and its access roads are different. When someone asks for steel fabrication in Navi Mumbai, we ask early whether the plot is in the TTC belt, in Taloja or in a residential node, because haulage, approvals and even working hours differ.

A land-use point worth checking

Public reporting has discussed government policy that could allow some industrial units in the TTC belt to be converted to residential use. We are not in a position to say how that applies to any specific plot. If you are leasing or buying an industrial plot, confirm its permitted use and lease conditions with MIDC before you spend on structural design. A shed designed for a use the plot may not allow is the most expensive kind of mistake.

Projects the company lists in Turbhe

For steel fabrication in Navi Mumbai specifically, the company’s own project list includes two Turbhe references:

  • Arihant Aalishan – Turbhe, Navi Mumbai; RCC & structural; 2022.
  • Shree Sawan Knowledge Park – Turbhe, Navi Mumbai; civil & steel; 2021.

These are the only Navi Mumbai projects we cite, and we cite them as listed. Both combine civil work with structural steel, which is the combination most Navi Mumbai clients ask about. You can see the wider portfolio on the projects page. If your job resembles either scope, tell us and we will explain which parts of the method carry over and which depend on your plot.

Industrial shed in Navi Mumbai: what plot-holders should decide first

An industrial shed in Navi Mumbai is usually built on an allotted plot with fixed boundaries, so the design starts from constraints rather than from a blank site. The decisions below set the structure, and they are cheaper to settle on paper than on site.

  1. Plot coverage and setbacks. The permitted built-up area, open margins and height limits come from the planning authority’s development control rules for that plot. Do not fix the shed footprint before you have these in writing.
  2. Clear height and span. Work backwards from the tallest machine, the racking height or the crane hook height, not from a catalogue span. Our industrial shed construction service starts with that operating envelope.
  3. Crane or no crane. An overhead crane changes the column design, the foundations and the choice between PEB and conventional framing. Decide it now, even if the crane is a later purchase.
  4. Truck movement. Container and trailer turning space, dock height and apron slope decide how usable the building is. Mark them on the layout before the column grid is frozen.
  5. Future bays. If you may extend later, keep one end wall as a removable frame and leave the foundation line clear.

Jawaharlal Nehru Port at Nhava Sheva, in the southern part of the Navi Mumbai region, is the main container port of the Mumbai Metropolitan Region, and the Navi Mumbai International Airport near Ulwe has been operating since December 2025. A port and an airport nearby make logistics-linked buildings a natural fit for the area, but whether a particular plot may be used for warehousing is a land-use question, not a market question.

PEB companies in Navi Mumbai: what to ask

Buyers searching for PEB companies in Navi Mumbai are often comparing a proprietary PEB package against a fabricated steel shed from a contractor. The two are not interchangeable. Ask each bidder which components are made in their own workshop and which are bought out, who designs the frame, who is responsible for the foundation interface, and who erects. We explain the programme advantage of PEB in why pre-engineered buildings win on timeline, and the full decision process in our buyer’s guide to industrial sheds and PEB in Mumbai.

Warehouse construction in Navi Mumbai: details that get missed

Warehouse construction in Navi Mumbai is mostly about the floor and the edges. The slab has to carry racking or forklift loads without cracking at the joints, the dock edge has to be protected, and rainwater from a large roof has to leave the plot without flooding the apron. Fire tender access around the building is a frequent query during the fire approval stage, so keep a clear perimeter route in the layout from the beginning.

Civil contractors in Navi Mumbai: foundations, plinths and site development

Civil contractors in Navi Mumbai are often asked to deliver the foundations, the plinth, the floor slab and the site drainage for a steel building. If the same company also fabricates the steel, the anchor bolt layout and the column base details are controlled in one place, which avoids the most common interface error on a shed project.

Several things need to be settled before the first footing is cast.

  • Soil investigation. The geotechnical report fixes the foundation type. Plots near Thane Creek or in low-lying parts of the region can have different bearing and groundwater conditions from plots on higher ground, so never assume the neighbour’s design applies to you.
  • Levels and drainage. Set the plinth level against the access road and the stormwater line, not just against the plot corners.
  • Anchor bolt accuracy. Templates and survey checks before concreting prevent column misfit later.
  • Curing and monsoon planning. Pour programmes need a plan for June to September, when rain interrupts excavation and concrete work across the region.

Our guidance on RCC for industrial plots is in RCC foundations for industrial buildings, and the service itself is described under civil works. Clients looking for construction contractors in Navi Mumbai who can run civil and steel under one contract should still ask for a written scope split between the two, so that anchor bolts, grouting, plinths and sheeting each have a named owner.

Which of our services fit Navi Mumbai projects

Five of the company’s seven services map naturally to steel fabrication in Navi Mumbai and the civil and shed work around it. The table shows where each typically fits. It describes the kind of work, not specific projects.

ServiceTypical Navi Mumbai useWhy it fits
Industrial shedsFactory sheds, warehouses, PEB buildings on MIDC plotsPlot-based work with crane, ventilation and expansion needs
Civil worksFoundations, floor slabs, roads and drainage inside the plotKeeps anchor bolts and column bases under one control
Heavy structure worksPlant structures, equipment supports, pipe racks, heavy erectionProcess units need engineered steel and lifting plans
Pipeline worksIndustrial, water and firefighting pipelines inside industrial sitesFire water and process piping follow the building
Architectural steel worksStaircases, canopies, railings and facade frames for commercial and residential nodesFinish-sensitive work needs workshop control

Skyways, foot over bridges and site camps are also on our list, but they depend on a specific client brief and are easier to scope in a direct discussion.

How work reaches Navi Mumbai from the Ghatkopar workshop

For steel fabrication in Navi Mumbai, the company has one workshop, in Ghatkopar (East), and no office in Navi Mumbai. Steel is cut, welded and fit-checked there, then dispatched in loads sequenced to the erection plan. Ghatkopar sits on the eastern side of Mumbai, which is the side facing Thane Creek and Navi Mumbai, so loads for Navi Mumbai do not have to cross the island first.

The corridor most loads follow is the Ghatkopar–Mankhurd Link Road, a road of about 4 km that links Ghatkopar to Mankhurd, then the Sion–Panvel Highway across Thane Creek on the Vashi Bridge, which connects Mankhurd with Vashi. From there, TTC belt sites are reached by Thane–Belapur Road, and waterfront sites by Palm Beach Road, a road of about 10 km that connects Vashi to CBD Belapur alongside the creek. The Mumbai Trans Harbour Link, opened in January 2024, is a separate crossing between south Mumbai and south Navi Mumbai.

The exact route and timing for long or heavy loads are set with the transporter and the traffic authorities for the day of movement. We plan this in advance and ask the client for site access details, because a tight fabrication schedule can be wasted by a gate that cannot take a long trailer. Ask us how we match-mark members, how many pieces ship per load and what laydown area the site needs. You can see the equipment behind this work on the machineries page.

Approvals and coordination points for Navi Mumbai plots

The approval route depends on where the plot is. The table below is a map of questions to ask, not a legal opinion. Always confirm the current rule and form with the authority itself.

Plot typeWho to approachWhat to confirm
MIDC industrial plot (TTC belt, Taloja)MIDC, through its online Building Plan Approval Management System (BPAMS) and single-window clearanceBuilding permission, provisional and final fire approval, occupancy or completion steps
CIDCO node plot inside NMMC areaNMMC Town Planning for building proposals and occupancy; CIDCO as landowner or planning authority where applicableWhich body issues permission, and whether a CIDCO NOC is needed
Taloja or other Panvel-side plotPanvel Municipal Corporation and CIDCO or MIDC, depending on the landPlanning authority for the specific survey number or plot
Land near the airportCIDCO acts as Special Planning Authority for the Navi Mumbai Airport Influence Notified Area (NAINA), notified in January 2013Whether the plot is still inside the area, since boundaries have been revised

Fire, environment and factory-related approvals

The Maharashtra Fire Prevention and Life Safety Measures Act, 2006 requires the owner or occupier to provide and maintain the fire safety measures listed in its schedule, and to file a compliance certificate from a licensed agency. A completion certificate cannot be issued unless those requirements are met. In MIDC areas, fire approval is processed through MIDC’s own fire department, and MIDC lists documents such as the MPCB consent and a process flow chart for industrial proposals.

Sites near Thane Creek or mangroves should be checked for Coastal Regulation Zone applicability, since the CRZ notification covers tidal-influenced water bodies including creeks. If the building will house a factory, the factory plan approval and licence process under the state industrial safety authority also applies. The Occupational Safety, Health and Working Conditions Code was brought into force on 21 November 2025, so confirm the current forms and rules before filing.

Aadyaan supplies the structural drawings, design basis and fabrication details these submissions need. The architect or licensed engineer who files on your behalf remains your appointee.

Monsoon, creek air and coatings on Navi Mumbai sites

Mumbai’s southwest monsoon runs from June to the end of September, with the heaviest rain in July, and the Navi Mumbai region across Thane Creek has a similar coastal setting, with creeks and mangroves nearby. For steel, that means humid air, wet-dry cycles and, close to the water, salt in the air. On any steel fabrication in Navi Mumbai job, coating is part of the structural specification and should be decided at design stage, as set out in monsoon-ready structural steel.

On site, the practical points are straightforward. Protect surface preparation from rain and flash rusting. Touch up bolted and welded joints after erection. Seal roof sheet laps and fasteners properly. Keep gutters and downpipes sized for peak rain, not average rain. A shed that leaks in its first monsoon loses far more value than a slightly longer fabrication schedule would have cost.

A typical 3-bay shed on an industrial plot: how phases overlap (hypothetical)

The example below is hypothetical. It describes a plain three-bay shed with a modest crane on an MIDC plot, and shows the order of work, not a fixed duration. Real programmes depend on soil, approvals, steel procurement and weather.

PhaseWhat happensRuns alongside
1. Brief and surveyPlot documents, levels, soil report, operating requirements, crane dataApproval documents being assembled
2. Design and drawingsFrame design, foundation loads, general arrangement, connection detailsPlan submissions to the authority
3. Site preparation and foundationsClearing, levelling, excavation, footings, anchor bolts, plinthFabrication of columns and rafters in Ghatkopar
4. Fabrication and coatingCutting, welding, trial assembly, surface preparation, primer and finishCuring of foundations
5. ErectionColumns, rafters, bracing, crane girders, purlinsSlab preparation in completed bays
6. Envelope and servicesRoof and wall sheeting, gutters, doors, ventilation, fire fighting and electricalFlooring and external drainage
7. Testing and handoverInspections, snag list, fire and structural documentationFinal authority submissions

The key saving comes from overlap: fabrication and foundations happen together. A weak spot in most schedules is the approval stage, so start the paperwork while drawings are still being finished.

Planning checklist for steel fabrication in Navi Mumbai

  1. Confirm the plot’s owner, planning authority and permitted use in writing.
  2. Collect the allotment or lease documents, plot plan and any existing approved drawings.
  3. Commission a soil investigation suited to the plot and the planned loads.
  4. Fix the clear height, span, bay spacing and crane details before design starts.
  5. Mark truck movement, fire tender access and drainage on the layout.
  6. Decide the coating specification based on distance from the creek and expected exposure.
  7. Agree who files which approval, and who owns the fire compliance documents.
  8. Check gate width, road width and laydown space for long steel members.
  9. List what is inside and outside each contractor’s scope: civil, steel, sheeting, services.
  10. Set a monsoon plan for excavation, concreting and erection between June and September.

Next step: what to send us

To discuss steel fabrication in Navi Mumbai for your plot or tower, send us the following and we will come back with questions and a scope proposal:

  • The plot or site address, with node name and survey or plot number.
  • Drawings, even if rough, and the intended use of the building.
  • Soil report, if one exists, and any approved plans already issued.
  • Target start and completion dates, and any fixed machine delivery date.
  • Site access details: gate, road width, working hours and storage space.

Send these through the contact page, or call +91 98211 99142. If you are comparing locations on both sides of the creek, our guide to Thane covers the other side of the Thane–Belapur corridor, and our Ghatkopar page explains where the work is fabricated. We will arrange a site visit once the basic documents are in hand, so the first discussion is about your actual plot rather than a general brochure.

Frequently asked questions: Navi Mumbai

No. The company’s only office and workshop is in Ghatkopar (East), Mumbai. Steel is cut, welded and fit-checked there, then dispatched to Navi Mumbai sites in loads planned around the erection sequence, while erection and civil teams are mobilised to the plot. Office hours are Monday to Saturday, 9:30 AM to 7:30 PM, and a site visit can be arranged once your basic plot documents are ready.

We take enquiries across Navi Mumbai, including the TTC industrial belt (Turbhe, Mahape, Rabale, Airoli), the residential nodes such as Vashi, Nerul and CBD Belapur, and Taloja. The company’s own project list includes two Turbhe references, Arihant Aalishan (RCC & structural, 2022) and Shree Sawan Knowledge Park (civil & steel, 2021). For anywhere else we start from your plot details, not from a claim of past work.

On MIDC plots, building permission is handled through MIDC’s online Building Plan Approval Management System and single-window clearance, and fire approval is scrutinised by MIDC’s own fire department under the Maharashtra Fire Prevention and Life Safety Measures Act, 2006. Rules and forms change, so your architect or licensed engineer should confirm the current procedure with MIDC before drawings are finalised.

Yes, in planning terms. Taloja has its own MIDC industrial area and falls under the Panvel Municipal Corporation, whereas the TTC belt along Thane–Belapur Road is mostly within NMMC limits for civic matters. Access roads, haul distance from our Ghatkopar workshop and the authorities involved all differ, so tell us the exact plot or survey number early and we will plan the logistics around it.

Members are fabricated and match-marked in Ghatkopar, loaded in a sequence that follows erection, and sent by road. A common corridor is the Ghatkopar–Mankhurd Link Road, then the Sion–Panvel Highway over the Vashi Bridge, then Thane–Belapur Road for TTC belt plots. Route and timing for long loads are fixed with the transporter and traffic authorities, so send us your gate width, road width and laydown space.

It depends on span, crane duty, geometry, future expansion and how fast you need the building. A regular envelope with no heavy crane often suits PEB; heavy crane duty or unusual layouts can favour conventional framing. Read our PEB timeline article and the industrial shed buyer’s guide, then send your requirements so we can compare both honestly.

Yes. Aadyaan is a structural steel fabrication, RCC civil and industrial construction contractor, so foundations, plinths, steel frames and sheeting can sit under one scope. We still recommend a written split of responsibilities for anchor bolts, grouting, slab and drainage interfaces. See our civil works and industrial sheds pages for what each service covers.

← All areas we serve Discuss a Navi Mumbai project

Start a conversation

Have a drawing, a site, or just a deadline?
Let’s talk about it.

Send us the scope and we’ll come back with a realistic programme and a priced proposal — usually within three working days.