If you are looking for civil contractors in Andheri, the first thing to settle is which Andheri you mean. The suburb is split into Andheri East and Andheri West, and the two sides ask very different things of a contractor. The east holds the MIDC industrial estate, the SEEPZ export zone, Marol and Sakinaka, with the Mumbai airport at Sahar close by. The west holds Lokhandwala, Four Bungalows, Seven Bungalows, Versova and Oshiwara, much of it residential and media-related.
This page is written by the engineering desk at Aadyaan Infrastructure Pvt. Ltd., a Ghatkopar-based structural steel fabrication, RCC civil and industrial construction contractor founded in 1999. It sets out what typically gets built in Andheri, what constrains the work, which of the company’s seven services fit, and what to plan before civil contractors in Andheri are appointed. It does not quote rates, because rates depend on drawings, soil, access and schedule.
Civil contractors in Andheri: what to look for
A contractor who is comfortable in Andheri has usually had to solve four problems: working beside live buildings, lifting steel near an airport, keeping a site workable in heavy rain, and moving heavy material through congested roads. Ask every shortlisted firm how it would handle those four on your plot, in writing, before you compare quotations.
- Scope fit. Does the firm do RCC and structural steel under one roof? A steel shed on an RCC plinth split between two contractors creates an interface at the anchor bolts, and that interface is where levels go wrong and blame starts.
- Fabrication control. Where is the steel cut and welded, and can your engineer inspect it before it is loaded? Shop fabrication is easier to check than work done on a cramped site.
- Access plan. Which gate, which road, which hours, and what is the longest member that can physically be delivered?
- Height and lift plan. Has the contractor asked about airport height limits and crane reach, or is that left for later?
- Paper trail. Approved drawings, material test certificates, welding inspection records and a handover set. If a firm cannot describe these, treat it as a warning sign.
For a broader vetting method that applies across Mumbai, see our guide on choosing a construction contractor in Mumbai.
Andheri East and Andheri West: two different working environments
The Brihanmumbai Municipal Corporation administers Andheri as two wards: K/E for the east and K/W for the west. Postal listings for the area include MIDC and SEEPZ on the east side, while the west is listed with Four Bungalows, Seven Bungalows, Lokhandwala, Versova and Oshiwara. The table below summarises how the two sides usually differ for a builder. Treat it as a planning aid, not a rule; every plot is its own case.
| Factor | Andheri East (MIDC, SEEPZ, Marol, Sakinaka) | Andheri West (Lokhandwala, Seven Bungalows, Versova, Oshiwara) |
|---|---|---|
| Typical brief | Industrial and office buildings: sheds, mezzanines, structural frames, plant platforms | Residential and commercial redevelopment, repairs, canopies, staircases, feature steel |
| Site shape | Estate plots with shared internal roads and neighbouring units | Compact plots, narrow lanes, buildings close on all sides |
| Heavy vehicles | Trucks are normal on estate roads, but gate and turning space vary | Often limited to smaller vehicles; deliveries need careful scheduling |
| Airport sensitivity | Close to the airport; check the height zoning map early | Also needs checking; do not assume the west side is exempt |
| Services that usually fit | Industrial sheds, heavy structure works, civil works, pipeline works | Civil works, architectural steel works, repairs and strengthening |
Construction company in Andheri East: MIDC, SEEPZ and Marol plots
SEEPZ was created in 1973 as an export processing zone in Andheri East. It has housed electronics hardware makers, software firms and jewellery exporters. Alongside it sits the MIDC industrial area, and Marol belongs to the same belt and is served by the Marol Naka station on Metro Line 1. Together they make this a mixed industrial and office district.
The company’s own project list includes K. Raheja Prime & Platinum at Marol, Andheri, listed as structural frames and dated 2019. That is the only listed project in Andheri, and this page cites it exactly as listed without adding detail. The full list is on the projects page.
Civil contractors in Andheri East are mostly asked for four kinds of brief in this belt, and any construction company in Andheri East should be able to describe its method for each:
- A new shed, mezzanine or plant platform inside or beside an existing industrial unit.
- A structural steel frame for an office or commercial building, often with a tight schedule.
- RCC repair, strengthening or foundation work on an ageing building that must stay partly occupied.
- Utility work such as pipe racks and industrial or firefighting pipelines inside a compound.
Each of these has a different critical path. A mezzanine is limited by headroom and the existing floor slab; a frame by crane access; a repair by occupant disruption; a pipeline by shutdown windows. A good scope document names the critical path first.
Airport height rules: the first question for steel erection in Andheri
Andheri sits beside the city’s airport, so height matters in a way it does not in most of Mumbai. The Ministry of Civil Aviation’s Height Restrictions for Safeguarding of Aircraft Operations Rules, 2015, require a No Objection Certificate for height clearance before a structure is built within 20 km of an aerodrome reference point. The rules define structures broadly: buildings, masts, towers, chimneys, poles, elevated roads, bridges and other man-made structures.
The Airports Authority of India publishes colour-coded zoning maps that show permissible heights in grids around each airport. As the guidelines hosted on the municipal portal describe it, a building that stays within the mapped limit does not need a separate AAI clearance, while one that exceeds it must apply through AAI’s online NOCAS system. Heights in reported Mumbai cases are stated as elevations above mean sea level, so the ground level of your plot affects how much you can build.
For steel work, three points follow:
- Roof and rooftop equipment. A PEB ridge, a lift machine room, a water tank or a rooftop mast all add height. Fix them against the permissible top elevation before the design freezes.
- Cranes. The rules are written around structures. Whether a temporary tower crane or a long boom needs its own clearance is something to confirm with AAI’s regional office before the lift plan is finalised, not after the crane is booked.
- Timing. Press reports in 2022 described construction near the Mumbai airport being held up for months awaiting height NOCs. Apply early and keep the application number on file.
The height NOC is the owner’s or developer’s application, but the contractor should know the approved elevation, because it limits erection equipment as much as the finished structure. Check the current process on AAI’s website, since the system and its thresholds have been revised before.
Structural steel contractors in Andheri: when steel beats RCC
When owners search for structural steel contractors in Andheri, they are usually after one of three advantages: speed, lighter weight on an existing foundation, or a long clear span. Most civil contractors in Andheri who take on steel frames either fabricate in-house or subcontract it, so ask who actually makes the members. Steel members are fabricated in a workshop while site preparation continues, so the two activities overlap instead of following one another. That overlap is the main reason steel frames suit tight schedules.
Lighter weight matters in Andheri because many sites involve adding floors or platforms to existing buildings. Whether the existing foundation and columns can take the extra load is a question for a structural engineer, working from IS 456 for the concrete, IS 800 for the steel, IS 875 for loads and IS 1893 for earthquake provisions. A contractor can fabricate and erect; it should not replace that design check.
Steel is not always the answer. RCC is often more suitable where fire resistance, mass or a low-maintenance finish is the priority, and for many foundations and slabs it is the only sensible choice. Our guide to steel structure versus RCC structure in Mumbai sets out the trade-offs in detail. The company’s heavy structure works cover plant and warehouse steel, heavy erection, pipe racks and equipment supports.
Corrosion on the western edge
Versova and the western side of Andheri are closer to the sea, where salt-laden air attacks unprotected steel faster. Specify the paint system, surface preparation and touch-up plan in the contract, not in a verbal assurance. Our note on monsoon-ready structural steel explains how coating and drainage details change the life of a frame.
Industrial shed in Andheri MIDC: what is realistic on a built-up plot
Most plots in an established industrial estate are already built over. A new industrial shed in Andheri MIDC therefore usually means one of three things: replacing an ageing roof with a new frame, extending an existing shed sideways, or adding a mezzanine to gain floor area without a larger footprint. Each is a different construction problem from a greenfield warehouse.
Before a drawing is started, answer these five questions:
- What do the plot lease and the estate’s own rules allow in terms of built-up area, height and use? Confirm the current position with the estate authority.
- What is the clear height the process needs, and what does the airport height limit leave you?
- Can a crane stand on the plot, or must the frame be erected in smaller sub-assemblies by chain blocks and winches?
- Does the existing structure need to keep operating during the work?
- Where will the water go? Roof drainage and plinth levels in an estate that already floods in heavy rain cannot be an afterthought.
A pre-engineered building (PEB) is quicker to put up than a conventional truss shed in many cases, though design and fabrication lead time must be built into the schedule. The company’s industrial shed construction service covers factory sheds, warehouse sheds and PEB. For process and mezzanine questions, read our guide to industrial shed and PEB construction in Mumbai.
Steel fabrication in Andheri: made in Ghatkopar, assembled on site
The company does not fabricate in Andheri. Steel fabrication for Andheri jobs is carried out at the Ghatkopar workshop, which has in-house welding including submerged-arc and CO2 sets, plasma and gas cutting, grinding, winches, chain blocks and compressors. Members travel to Andheri as finished or near-finished pieces and are joined on site, mostly by bolting where the design allows.
This split suits dense areas. Cutting, welding and grinding generate heat, sparks, noise and fumes, and the less of that you do beside a neighbour’s wall, the fewer complaints and fire risks you create. Shop fabrication also lets a client’s engineer inspect weld quality and dimensions in one place, instead of at height on site.
Transport shapes the design, though. The longest member you can deliver is set by vehicle length, lane width and turning room at the gate, not by the drawing. Raise this at the start so splices are placed where the road allows rather than where the structure prefers.
Reaching Andheri from the Ghatkopar workshop
The workshop is at Ramabai Ambedkar Nagar in Ghatkopar East. Andheri is reached by a mix of Metro and road corridors, and each does a different job.
- Metro Line 1 for people. The line runs from Versova to Ghatkopar over 11.4 km, fully elevated, and nine of its 12 stations are in Andheri. It lets engineers and supervisors travel between the workshop end and Andheri sites without joining road traffic. It carries people, not steel.
- Jogeshwari–Vikhroli Link Road for material. The six-lane link is 10.6 km long and joins the Eastern Express Highway at Vikhroli to the Western Express Highway at Jogeshwari, passing SEEPZ on the way. It is one of the east-west routes from the eastern suburbs to Andheri.
- The Andheri–Ghatkopar Link Road and others. Reports from the DNA newspaper describe the Andheri–Ghatkopar Link Road and the Jogeshwari–Vikhroli Link Road as congested east-west links. Route choice on the day depends on traffic, not on a fixed plan.
Heavy-vehicle movement in Mumbai is also subject to Traffic Police notifications that restrict entry or movement at certain hours and that have changed from time to time. Check the current notification before fixing delivery dates, and discuss early-morning or off-peak deliveries with your contractor. If you also have work in the Ghatkopar and Kurla belt, our Ghatkopar area page and Kurla area page describe how the workshop supports sites nearer to it.
Monsoon and drainage: planning around the Andheri Subway
The Andheri Subway, the underpass that links the east and west sides, is known for waterlogging in heavy rain. Press reports describe it being closed in the monsoon and the civic body studying drainage fixes, including diverting the Mogra nullah. Whatever the long-term solution, a contractor should plan for the east-west link being unavailable on bad days.
Civil contractors in Andheri need a wet-weather plan for exactly this reason, and it affects you in three ways. A truck that must cross from east to west may need a longer detour. Deliveries scheduled for a rain-forecast day carry a real risk of delay. And a site that sits low relative to its approach road will see water in the excavation before it sees any in the street.
Practical measures are straightforward. Stage steel deliveries so that a missed day does not stop erection. Keep pumps and temporary drains ready before excavation begins. Sequence foundation pours for the drier months where the schedule allows. Apply the final coat of paint to steel when the surface can dry. Our civil works team can advise on dewatering and foundation sequencing as part of the scope.
Civil contractor in Andheri West: compact plots and occupied buildings
A civil contractor in Andheri West is more often working in a compact setting than an open one: a building that must be repaired while people live in it, a society redevelopment with neighbours on every side, or a commercial frontage that needs a new canopy or staircase. The challenges here are noise, dust, vibration, working hours and access for small vehicles.
On occupied buildings, the repair method matters as much as the repair itself. Spalling concrete, exposed reinforcement and water ingress each need a different treatment, and a quick patch over corroding bars can hide a problem that returns. Ask for a condition survey before the scope is fixed, and for a clear method statement that explains how debris will be removed and how occupants will be protected.
Working hours in residential areas are set by a mix of society rules and local regulation. Confirm the permitted hours with the society or the ward office before programming noisy work. For feature steel such as staircases, facade frames and canopies, the company’s architectural steel works service covers fabrication and installation.
Civil contractors in Andheri: which service fits which brief
| Brief | Typical Andheri setting | Service | Main planning issue |
|---|---|---|---|
| New or replacement shed, PEB, mezzanine | MIDC and Marol industrial units | Industrial sheds | Height limit, plot rules, crane access |
| Steel frame for plant, warehouse or office | Marol, SEEPZ edge, Sakinaka | Heavy structure works | Erection equipment, airport height |
| RCC foundations, repairs, site development | Both east and west | Civil works | Occupied buildings, water, neighbours |
| Canopies, staircases, facade steel | Commercial frontages, Lokhandwala and Oshiwara | Architectural steel works | Finish, coating, installation hours |
| Fire-fighting and utility pipelines | Compounds, towers and campuses | Pipeline works | Shutdown windows, testing, tie-ins |
| Site offices, stores, workforce accommodation | Larger project sites | Transit camp (site camps) | Space, sanitation, security |
A note on the last row: in Mumbai, “transit camp” is also used for temporary housing of residents during redevelopment. The company’s transit camp service means workforce accommodation and site camps for construction and industrial projects. It does not cover tenant transit housing.
Approvals and coordination: what the client should plan for
Approvals sit with the owner or developer, but a contractor should know which ones can hold up the work. The list below is a guide, not legal advice; confirm each item with the relevant authority for your specific project.
- Airport height clearance. Required for structures within the 20 km radius under the 2015 height rules, unless the design stays within the mapped permissible height.
- Municipal permissions. Building and structural permissions through the Municipal Corporation of Greater Mumbai, which is also known as the BMC. Procedures change, so check the current requirements for your category of work.
- Fire safety. Fire-safety installations in Maharashtra fall under the Maharashtra Fire Prevention and Life Safety Measures Act, 2006, as amended. Ask your consultant which provisions apply to the building.
- Plot or estate conditions. For MIDC and other estate plots, check lease terms and estate rules on built-up area, height and use.
- Society or neighbour consent. Particularly important in Andheri West, where buildings stand close together.
- Traffic and delivery. Heavy-vehicle timing notifications and any local restrictions on access roads.
If the site is live, read our note on construction safety on live sites before the contractor mobilises.
Planning checklist before you appoint civil contractors in Andheri
- Decide whether the site is in Andheri East or West, and note the nearest main road and the narrowest approach.
- Get a survey of the plot with levels, and mark existing structures, services and drains.
- Check the airport height zoning map for the plot and note the permissible top elevation.
- Confirm lease or society conditions on height, area and permitted working hours.
- Ask the structural engineer to confirm loads and foundation capacity under the relevant IS codes.
- Agree who is responsible for each approval and who files it.
- Fix the longest deliverable member and mark splice locations accordingly.
- Plan for monsoon: drainage, pumping, delivery buffers and a coating plan.
- Define inspection points: material certificates, weld inspection, and a pre-dispatch check at the workshop.
- Ask for a written phasing plan with milestones and what the client must provide for each.
A typical project in phases (hypothetical example)
The sequence below is illustrative. It describes a typical two-bay mezzanine with a small rooftop plant platform on an existing industrial unit, not a real Andheri project.
- Brief and survey. Measure the unit, check existing columns and slab capacity, and record the clear height.
- Constraints check. Confirm lease conditions, airport height limit and fire-safety implications with the owner’s consultant.
- Design and drawings. Structural design under the relevant IS codes, followed by shop drawings with splice and bolt details.
- Foundation and base work. Strengthen or add RCC footings or base plates where the check requires it, with anchor bolts set to template.
- Fabrication. Cutting, welding and grinding at the Ghatkopar workshop, with an inspection before loading.
- Delivery. Staged loads in vehicles that suit the access lane and the Traffic Police timing for that week.
- Erection. Lift members by chain block, winch or crane as the site allows; bolt up and check alignment.
- Finishing and handover. Decking or flooring, coating touch-up, cleaning, and a handover set of drawings and test records.
Where civil contractors in Andheri are asked for a larger frame rather than a mezzanine, the shape is the same but the critical path moves to crane access and height clearance. Our article on how to choose a structural steel fabricator in Mumbai lists what to inspect at each stage.
Next step: what to send us
To receive a meaningful proposal from civil contractors in Andheri, send the following through the contact page or by email to contract@aadyaaninfra.com:
- Site address or a pin, and whether it is Andheri East or West.
- Drawings or sketches, even rough ones, and any existing structural report.
- The type of work: shed, frame, mezzanine, RCC, repair or pipeline.
- Your target dates and any shutdown or occupancy limits.
- Access details: gate width, lane width, working hours and crane space.
The workshop is open Monday to Saturday, 9:30 AM to 7:30 PM, and you can also reach the team on +91 98211 99142. A site visit is the right way to confirm access, levels and constraints before a quotation is compared. If you want to see the kind of work the company lists first, start with the completed projects page, or read about Powai and Vikhroli, which sit along the same Jogeshwari–Vikhroli Link Road.
Frequently asked questions: Andheri
Under the Ministry of Civil Aviation’s 2015 height rules, a structure within 20 km of an aerodrome reference point needs a height-clearance NOC unless it stays within the permissible height on AAI’s colour-coded zoning map. Andheri is next to the Mumbai airport, so check your plot early. Confirm with AAI whether temporary cranes are covered, and see our heavy structure works page for erection planning.
Yes, in technical terms: the company builds factory sheds, warehouse sheds, PEB and mezzanines. On an estate plot the limits are usually legal rather than structural, so check lease terms, built-up area and height with the estate authority first. Send drawings and the plot details through the contact page and the engineering team will review feasibility, access and crane space before quoting.
At the company’s Ghatkopar workshop, which has in-house welding (including submerged-arc and CO2 sets), plasma and gas cutting, and grinding. The company has no workshop in Andheri. Members are delivered as finished or near-finished pieces and bolted or welded on site, which keeps hot work, noise and sparks away from neighbours and lets your engineer inspect fabrication before dispatch.
By fixing the access constraint first. The longest deliverable member is set by vehicle length and gate or lane width, so splices are placed to suit the road. Deliveries are staged in smaller loads, hot work is kept at the workshop, and working hours follow society or local rules. A site visit confirms what a drawing cannot. See civil works for repair and RCC scope.
Steel is lighter and is often chosen for additions, but it is not automatic. A structural engineer must first check the existing foundation and columns under IS 456, IS 800, IS 875 and IS 1893. RCC can be preferable for fire resistance or mass. Our guide to steel versus RCC in Mumbai compares the two honestly.
Compare scope, not totals. Check that each quote covers the same drawings, steel grade, coating system, foundation work, inspection points, erection method and handover documents. Ask each firm how it handles the airport height limit, access and monsoon delays. A low figure that leaves out coating, anchor bolts or crane cost is not comparable. Our guide on choosing a contractor has a checklist.
It slows some tasks and not others. Excavation and foundation pours are the most weather-sensitive, and the Andheri Subway has been reported closed in heavy rain, which affects east-west deliveries. Steel fabrication continues at the Ghatkopar workshop, and erection can be staged around forecasts. Plan pumping, drainage, delivery buffers and a coating schedule from the start.
Send the site address and whether it is Andheri East or West, any drawings or sketches, the type of work, your target dates and the access details such as gate width and crane space. Email contract@aadyaaninfra.com or use the contact page. The workshop is open Monday to Saturday, 9:30 AM to 7:30 PM, and a site visit follows once the brief is clear.